SOLIDWORKS MOULD DESIGN

SOLIDWORKS MOULD DESIGN

TRAINING COURSE

Enhance your SOLIDWORKS Skills
Why SOLIDWORKS Mould Design?
Mould tool design in SOLIDWORKS allows you to generate the core and cavity models from your SOLIDWORKS design.

Account for draft angles, ejector pins and parting lines in your design to check the requirements for tooling. Understand techniques of how best to work with imported data (typical in mould design).

PREREQUISITES NOTE: This course is available as part of the Silver, Gold & Platinum Training Passports
View Agenda
Book Training
Training Price
VIEW AGENDA

SOLIDWORKS Mould Design - Training Course Reviews

Feefo logo
We use Feefo (the global feedback engine) to gather anonymous but certified genuine reviews from our customers.
Review Date
Rating
Product
Review Details
Mould Design Training
Albie was excellent, very patient and ensured that all on the course understood the material he was teaching.
Mould Design Training
Great course as usual, the trainer was very helpful with any issues.
Mould Design Training
I wasn't sure how relevant the mould design course would be; I don't often get involved in plastics. Rory Nile made it both enjoyable, relevant & very informative. The course content enforced everything I had learnt on the Surface Modelling course. I would recommend this course to everyone, regardless of their area of work.
Mould Design Training
Fantastic and patient Trainer, made the course thoroughly enjoyable.
Mould Design Training
It was very interesting and I learned new things, new commands that I didn't use.
I learned different ways to design a mould.
The only thing that I would like to have is the book of the course but I can see it on-line
Mould Design Training
The trainer is very good providing easy to understand explanations throughout the course.
I did not ( still have not) received the mould design e book from ds graphics
Mould Design Training
Great course! Quite complicated aspects clearly explained and easy to fillow. Finished the course confident in moukd design!
Mould Design Training
Jon the tutor knew very well the course and his quick adaptation to peoples way of learning was impressive. He made sure everyone understood the course and never left anyone behind during lessons and exercises.
Mould Design Training
Excellent Training
Mould Design Training
Well paced and very knowledgeable
Mould Design Training
The trainer was very friendly, knowledgeable and open to questions throughout the course.

Great new office, facilities, with extremely friendly staff.
Mould Design Training
Thorough course taught by a knowledgeable instructor
Mould Design Training
Well prepared, professional knowledge, polite person
Mould Design Training
Very quickly solved the problem and advised on how to avoid it happening again.
Mould Design Training
Resolved a conflict of interest quickly.
Mould Design Training
Fully knowledgeable trainer, every thing well explained, each lesson and study case were given enough time.
Mould Design Training
I have now had Julie for a couple of courses and she is knowledgeable and helpful. would be happy to attend another course she Is hosting. nice small group too.
Mould Design Training
Yes, trainer was helpful all time and she was funny and full of energy.
Mould Design Training
Excellent!
Mould Design Training
The course was well presented ,interesting and full of useful information
Mould Design Training
Fantastic service from Solid Solutions. Julie our tutor taught at nice steady pace and was always patient whenever we got stuck, explaining where we had gone wrong.
Mould Design Training
Lots of pre-complete examples within the course, fast paced, and full of content, the reference book will certainly come in handy. The course trainer ensured that any mistakes were corrected and explained how/why they occurred. Well delivered and contained lots of tips and tricks on mould design.
Mould Design Training
Service Rating : Great service as usual. Rory is an enthusiastic trainer with a great pace. He repeats without being boring, and this means that things actually stick , for me anyway.

Thanks again, look forward to the next.
Product : Brought as part of the passport on Black Friday deal, so excellent value.
Mould Design Training
Excellent trainer who took the time to explain things clearly.
Mould Design Training
Service Rating : Rod was really helpful when anything wasn't working, and was great especially as it was his first time teaching the course.
Product : The mould design course covers most of what people would need.
Mould Design Training
Excellent trainer
Mould Design Training
Service Rating : Rory was friendly, helpful and knowledgeable as always.
Product : Extremely in depth and easy to understand.
Mould Design Training
Service Rating : The course is very well prepared and good technical documentation supplied
Product : The course is very well prepared and good technical documentation supplied
Mould Design Training
Service Rating : felt he had too much to do with different levels of users being far different.
Product : too rushed didn't feel course was spaced out well everything seemed very quick giving out information and tricks and with long periods of case studies which were taken by different level people leaving myself bored and losing interest.
also food was awful.
Feedback Response: Service rating : Hi Oliver. Thanks for taking the time to provide feedback. I will have to look back at the course details to see whether this was a course running at capacity. This can pose a few issues and we do consider the mould design training as one of the more advanced modules.

Internally we are thinking of ways to police variations in abilities but I am sure you can understand this is tricky. We always check that customers have completed the prerequisite courses but this still cannot guarantee that these skills have been bedded in with hands work time. I don't really want to get into assessing users prior to arrival as this would put up a barrier I feel.

If there are any topics you would like further information on within the mould tools syllabus (or beyond), please let me know. We have some useful topics covered online in our webinar series but we'd also be happy to run through any specifics with you.

Once more thanks for your feedback.

Adam Hartles
Training Manager.
Product : Oliver, I need to reply here too to remove the alert in our system is removed. I have tried to answe as best as best as I can above. However I take your comment about food on board. We are a little limited with the canteen downstairs but there is a little bit of scope for variety.

Thanks again
Adam.
Mould Design Training
Service Rating :Excellent knowledge, good communication and super helpful. Couldn't ask for more Product : A big course, lots to cover in two days
Enterprise PDM Training
Service Rating :Very knowledgeable, excellent host and trainer.


Product : Excellent content, first class facilities
Mould Design Training
Service Rating :Alex was very good, he explained things clearly and gave all the necessary help when required.
Product : If you produce moulds on a regular basis the course is very good, I would recommend that to go on the course you should do the surface modelling course first so you are familiar with the functions prior to the course, as a large portion of the course uses surface modelling techniques.
Mould Design Training
Alex helped everyone when they needed help and he spent time helping tailor the course to suit my needs.
Mould Design Training
very clear and concise
Mould Design Training
Service Rating :Great service as always, no complaints
Product : A useful tool for mould design but overall probably my least favorite course. very repetitive and some of the most useful sections felt squeezed in.
Mould Design Training
Service Rating : Great service as always, no complaints
Product : A useful tool for mould design but overall probably my least favorite course. very repetitive and some of the most useful sections felt squeezed in.
Mould Design Training
Service Rating :Nick was excellent this was the first time I have had a tutor that had experience in my particular field and it made all the difference.He knew the answers to any questions asked and most importantly he could give you real world scenarios that the functions he was using could be used in.
Product : The course was brilliant and really informative the work load was spot on (no lulls or boring parts).The case studies were also really helpful giving you multiple ways around the problems that may come your way when and if it came to making a mould.
Mould Design Training
Service Rating : Nick was excellent this was the first time I have had a tutor that had experience in my particular field and it made all the difference.He knew the answers to any questions asked and most importantly he could give you real world scenarios that the functions he was using could be used in.
Product : The course was brilliant and really informative the work load was spot on (no lulls or boring parts).The case studies were also really helpful giving you multiple ways around the problems that may come your way when and if it came to making a mould.
Mould Design Training
Service Rating :Nick was excellent this was the first time I have had a tutor that had experience in my particular field and it made all the difference.He knew the answers to any questions asked and most importantly he could give you real world scenarios that the functions he was using could be used in.
Product : The course was brilliant and really informative the work load was spot on (no lulls or boring parts).The case studies were also really helpful giving you multiple ways around the problems that may come your way when and if it came to making a mould.
Mould Design Training
Service Rating : Very responsive
Product : Less working examples more tuition
Mould Design Training
Service Rating : Good trainer who explained things well and showned more that just the book method to improve how you could do some of the case studies
Product : Great course.
Mould Design Training
Good knowledgeable trainer.
Excellent facilities in Leamington Spa.
Mould Design Training
Service Rating : The instructors pace was rather fast and he made a few mistakes which took time to resolve.
Product : Too much to cover in 2 days, covers a lot of advanced elements should be 3 days.
Top